Sliping filiment

Monday: organic model experiments
Tuesday: organic modeling experiment
Wensday:printing on craft bot
Thursday: printing on craft bot
Friday: fliment slip

                         slipping filiment
The slipping of filiment off the spool can be caused by many factors improper care , the filiment being loaded on to the spool wrong, and the qaulity of filiment it's self. Sorce1: https://3dprinting.stackexchange.com/questions/3234/troubleshooting-filament-slip-on-makerbot-5
Sorce2
1. Entaglement. the end of spool slips under another line of filiment. Solution: untangle and make sure the end stays clipped in also rewind and rework the filament
2. Climate. Mostuire: playing fliment is seseptibel to mostuire but isn't visabley noticeable just drys out. Heat: most filaments need to be stored under 120 degrees Fahrenheit or else things get bad
3.friction. (most likly our problem). Not only is to much friction bad but two little as it will fall off the side and tighten to fix this put some clothes in the side of the hole to generate some friction

Comments

Post a Comment

Popular posts from this blog

the nordic alphabet

Image
monday: printed die Tuesday: collected back round image and started to work on Nordic alphabet A-e started recording Wednesday: helped shrink wrap then got  through I and some additional second recording Thursday: almost done only 2 or 3 more  the chart to the left is what I used for the model's templates this project will slowly become bigger. In addition to this, it also explatoins the meaning of each symbol by knowing this I can form old spells or what they would believe would engrave magic energy the final product I will be working toward will be bracelet beads with engraved runes for protection as well as some dice engraved with these runes and many other things. So by already having them created, I can benefit and maintain focus on my models the engraving of them will be simpiler because the models for cutting will already be done. My inspirations for this project were the runes from Skyrim and other fantasy games all having there own interpretation of the runes in
Read more

Skoll and Hati

Image
This week Monday: printing Tuseday printing wensday Printing Thursday printing friday printing Skoll and Hati Skoll (meaning The one who mocks) and Hati (meaning The one who hates) are two wolves in norse mythology that both chase the sun and moon altho witch one chases witch is highly unclear they are the sons of finir the arch-wolf and are discribed being one black and one white it is siad when ragnorok begins they shall catch there prey plunging midgard(earth) in to eternal darkness.
Read more

cleaning a 3d printer nozzel

monday : 3d printer work tuseday 3d printer work wensday: 3d printer work Thursday 3d printer work/ prepare to print Friday prepair to print Cleaning the nozzel today i will explain two ways to clean a 3d printer nozzel and leave a link on were i found my information at the bottom. 1: copper brush copper brushed used on the out side of the nozzel scrud the nozzel this should get ride of out side dirt as well as anything at the tip of the nozzel possibly causing a clog. 2: acotone soaking soak the nozzel in acotone for 15 minits then whipe it off with a clean whipe this methode will destory dirt on the inside and out side of the nozzzel bu reqiurs removing the nozzel itsself. https://www.matterhackers.com/news/how-to-unclog-a-3d-printer-nozzle?gclid=Cj0KCQjw5qrXBRC3ARIsAJq3bwqcZTz_xaA_A2UcvDAOn_Kul7NzqR8H5G8iuQrZppr3kdlC39gMnngaAhXNEALw_wcB
Read more